华体会国际 的行走部分由支撑轮，支撑轮，驱动轮和轨道链节组成。当运行一定时间后，这些零件将显示出一定程度的磨损。但是，如果计划进行日常维护，则仅需一点时间进行适当的维护就可以避免将来在“华体会国际 支腿上进行大量操作”。它不仅节省了大量的维护成本，而且避免了维护引起的延误。接下来，小编将为您介绍三种方法：
The walking part of the lengthening arm excavator is composed of supporting wheels, supporting wheels, driving wheels and track links. After a certain period of operation, these parts will show a certain degree of wear. However, if routine maintenance is planned, it only takes a little time to carry out appropriate maintenance, which can avoid "a large number of operations on the outriggers of the extended arm excavator" in the future. It not only saves a lot of maintenance costs, but also avoids the delay caused by maintenance. Next, Xiaobian will introduce you to three methods:
1、如果在倾斜的地面上反复行走了很长时间并且突然转弯，则链条链节的侧面将接触驱动轮的侧面，并且导轮。从而增加了磨损程度。因此，应避免在倾斜的地形上行走并尽可能避免突然转弯。直行大转弯，可很好的防止磨损。
1. If you walk repeatedly on the inclined ground for a long time and turn suddenly, the side of the chain link will contact the side of the drive wheel and the guide wheel. This increases the degree of wear. Therefore, you should avoid walking on sloping terrain and avoid sudden turns as much as possible. Straight and big turns can prevent wear and tear.
2、如果在链轮和支撑轮的一部分无法运行时继续使用，可能会导致滚子磨损，也可能导致链节磨损。如果发现不工作的滚筒，则要立即修 理！这样，可以避免其他故障。
2. If you continue to use it when a part of the sprocket and support wheel cannot run, it may cause roller wear and chain link wear. If you find an inoperative drum, repair it immediately! In this way, other faults can be avoided.
3、支撑轮，链轮，履带板螺栓，驱动轮安装螺栓，行走管道螺栓等的安装螺栓，因为长时间工作后由于振动容易使机器松动。例如：如果机器在履带板螺栓松动的情况下继续运行，甚会在履带板和螺栓之间形成间隙，这将导致履带板破裂。此外，间隙的产生还可能增加履带和导轨之间的螺栓孔，从而导致严重后果，因为履带和导轨不能被紧固，因此要更换履带和导轨。因此，华体会国际 出租租赁应定期检查并拧紧螺栓和螺母，以减少不必要的维修费用。
3. The mounting bolts of support wheel, sprocket, crawler shoe bolts, drive wheel mounting bolts, walking pipe bolts, etc. are easy to loosen the machine due to vibration after long-time work. For example, if the machine continues to operate when the track shoe bolts are loose, a gap will even be formed between the track shoe and the bolts, which will cause the track shoe to crack. In addition, the generation of clearance may also increase the bolt holes between the track and guide rail, resulting in serious consequences. Because the track and guide rail cannot be fastened, it is necessary to replace the track and guide rail. Therefore, the rental of the lengthening arm excavator should regularly check and tighten the bolts and nuts to reduce unnecessary maintenance costs.
The above is a detailed introduction about the leasing of long arm excavator, which I hope will be helpful to you If you have any questions, please contact us We will provide you with professional service //www.wondgo.com/
